|Application:||PCB Assembly ; DIP; Through Hole||Name:||Wave Welding Machine ; Heating Machine ; SMT Machine|
|Control:||PC||Max PCB Size:||30-250mm|
|Finger Material:||Ti||Usage:||SMT ; LED ; SMD ; And Son On|
|Preheating Method:||Hot Air||Preheating Zone:||2|
electric soldering machine,
quick soldering station
N250 Lead-free Hot Air Wave Soldering Machine N250 Automatic Intelligent Wave Welding Machine
JAGUAR N250 Lead-free Hot Air Wave Soldering Machine, as a member of Jaguar High-end series of Wave Soldering, standard configured 2 pre-heating zone, and totol pre-heating zone length up to 800mm, pre-heating zone structure is independ control, it's better to ensure pre-heat effect, and finally to ensure soldering effect. 3 kinds of material options (316L Stainless Steel ; Ti ; Cast Iron Enamel)
|Model No.||JAGUAR N250|
|Number of Pre-heaters||2|
|Preheating style||Hot air|
|Preheater consumption||220V 5KW|
|Control method||Press key +PLC (Option: touch screen, PC)|
|Range of temp. set-point||Room temperature---300℃|
|Preheating time||About 10-15mins for setting 150℃|
|Solder application||Lead-free / Sn-Pb|
|Solder pot capacity||220KG|
|Solder pot temperature||300℃|
|Solder pot consumption||380V 6KW|
|Solder temp. control method||PID&SSR|
|Wave motor power||500W 220V|
|Solder melting||About 120mins for setting 250℃|
|Conveyor direction||L→R (R→L optional)|
|Conveyor Inclination||4—7 º|
|Flux pressure||3-5 bar|
1. Automatic conveying power system and auto synchronous board feeding functions.
2. Solder Pot peak uses frequency conversing speed adjustment which can independently control the wave height.
3. Fluxer system using transverse Japanese spray nozzle, driven by pneumatic cylinder and PLC control, accurate and reliable.
4. PLC is used to control the machine, to ensure the reliability and stability of the system.
5. Pre-heaters using Infrared heating element, heat radiated efficiently to the circuit board with fast ramp up and fully activating liquid flux.
6. Special alloy solder fingers, strengthened double v-groove.
7. Solder-motor adopts imported high frequency conversion motor with independent control, stable performance and long lifetime.
8. Pre-heater passage with modularized design, meet with environmental protection requirement, safety and convenient to cleanup.
9.Preheaters uses three independent temperature control so as to ensure the excellent heat preservation, temperature uniformity, temperature accuracy in ±2ºC.
10.Timer startup feature for solder pot, solder melted within 90 minutes.
11. Automatic finger cleaner ensure the cleanliness of solder fingers.
Intelligent monitoring and alarm system ensure the stable performance and operators’ safety.
Configuration list :
SIEMENS control system + PC
Taiwan Sanyue 90W gear box 1:100K
Jaguar special double v-groove thickness 1.5mm
Taiwan Sanyue three phase 6 pole 0.18kw high temperature resistant
|Japanese lacquer ST-8|
Solenoid valve, regulating valve, connector, etc.
|Japan OMRON MY2 MY4|
|Taiwan, imported nickel wire|
Axial cross-flow blower
|24V NPN Swiss delight|
U type velocity measuring eye
|Solid-state relay||Switzerland Carlo|
Insulation type K Taiwan reach
Press key style
Contact Person: admin