|Model:||Jaguar R10||Number Of Heating Zones:||Top 10/ Bottom 10|
|Number Of Cooling Zones:||3(top 1, Bottom 1)||Heating Passage:||3700mm|
|Heating Style:||Hot Air||Cooling Style:||Forced Air Cooling|
|Max. Width Of PCB:||5000mm||Mesh Belt Width:||5000mm|
|Conveyor Direction:||L→R(option: R→L)||Conveyor Type:||Mesh And Chain|
electric soldering machine,
lead free wave solder machine
Top lead-free hot air lead-free reflow oven JAGUAR R10-D
1.Windows XP system with English and Chinese is easy to learn how to operate and can be change any time.
2. The digital control system adopted with PLC and Modular circuit to stabilized and accurate of repetitive precision.
3. Intelligent diagnosis system (IDS) has the function of trouble remind, alarm, list-out and saving data.
4. Temperature and blower speed can be controlled independently, to meet the high-precision requirements.
5.Effective heating zone length, the heat conduction in full uniform distribution, greatly improving the heating efficiency.
6.Forced cooling system with efficient cooling speed suits all different kinds of lead-free soldering paste.
7.PLC and PID closed loop control to achieve high precision temperature control and repeatable profiles.
8. Standard 10 couples of up and down heating zones with patented air management system to make hot air convection more efficient and faster thermal compensation.
9.The Dual rail conveyor make it can produce 2 PCB at same times, one machine equals to two machine.
10.The Dual rail width can be adjusted by manual.(option:automatically by SPG gear motor).
11.Chain Rails will be lubricated by central oil reservior device ,controlled by computer.
12.Strong software system can save all settings and can print all the data and profiles through PC.
13.With flux collecting system to keep inside zones clean and ensures more environmental emission.
14.Nitrogen protection system is optional.
||Number of heating zones||UP 10/BOTTOM 10|
|Number of cooling zones||Top:3, bottom:3|
|Length of heating zones||3900mm|
|Heating mode||hot air|
|Cooling Mode||Air Oven:Forced air; Nitrogen Oven: Water Chiller|
|Exhaust Volume||10m³/min * 2 exhausts|
||Max. Width of PCB||300mm* 2 single lane 50-500mm|
|Mesh belt width||600mm|
|Transmission Direction||L→R(or R→L)|
|Transmission Net Height||900±20mm|
|Transmission type||Mesh and Dual rail chain|
|Range of rail width||0-300mm* 2 single lane 50-500mm|
|Fixed rail side||1,4 rail fixed,2,3 rail moving|
|Components high||Top and bottom 25mm|
||Power supply||5 line 3 phase 380V 50/60Hz|
|Normal power consumption||10-14KW|
|Warming time||About 35 mins|
|Temp. setting range||Room temperature-300℃|
|Temp. control method||PID close loop control & SSR driving|
|Temp. control precision||±1℃|
|Temp. deviation on PCB||±2℃|
|Data storage||Process Data and status storage(80GB)|
|Nozzle plate||Aluminum Alloy Plate|
|Abnormal Alarm||Abnormal temp. (extra-high/extra-low temp.)|
|Board dropped alarm||Tower light:Yellow-warming, Green-normal, Red-abnormal|
Contact Person: Paul Zhu