|Type:||Reflow Solder||After-sales Service Provided:||Engineers Available To Service Machinery Overseas|
|Max. Width Of PCB:||300mm||Mesh Belt Width:||400mm|
electric soldering machine,
selective soldering machine
SMT Infrared Hot Air and Cool Air 8 Zones Reflow Soldering Oven for LED Light
SMD Soldering Machine
|Number of heating zones||Up 8/Bottom 8|
|Number of cooling zones||1|
|Length of heating zones||2800MM|
|Heating mode||Up hot air/bottom IR|
|Cooling Mode||Force air|
|Max. Width of PCB||300mm|
|Mesh belt width||400mm|
|Transmission Direction||L→R(or R→L)|
|Transmission Net Height||880±20mm|
|Power supply||5 line 3 phase 380V 50/60Hz|
|Normal power consumption||4-7KW|
|Warming time||About 20 mins|
|Temp. setting range||Room temperature-300℃|
|Temp. control method||PID close loop control & SSR driving|
|Data storage(PC Control)||Process Data and status storage(80GB)|
|Temp. deviation on PCB||±2℃|
|Nozzle plate||Aluminum Alloy Plate|
|Abnormal Alarm||Abnormal temp. (extra-high/extra-low temp.)|
|Board dropped alarm||Tower light:Yellow-warming, Green-normal, Red-abnormal|
Stable and reliable electrical control system
1. It adopts imported thermostat control which owns fuzzy control and PID intelligent precision control system.It can fast response the changes in external heat and ensure more temperature balanced by PID intelligent operation and automatic control heating .
2. Using thermocouple imported from Taiwan by each temperature zone, it can fast and sensitive induct the changes in each temperature zone, transfer and control timely, compensate the temperature balance in each zone .
3. Special SSR solid state relay matched with dedicated radiator improve the heat efficiency greatly and prolong the lifetime effectively. No contact output and fuzzy control function by thermostat, can monitoring the changes of outside temperature and calorific value, controlling the heating device by minimum pulse, ensuring the high precision of the temperature control & the uniform temperature in internal and the length ,direction, temperature distribution, all of these meet IPC standards .
4. Power is abundant, heat up fast, it’s only need 20 minutes from room temperature to constant temperature.
5. Failure diagnosis and sound light alarm.
6. Delay shutdown production function, uniform cooling after the shutdown: prevent component deformation.
The unique advanced long life heating system
1. The heating system adopt the Swedish nickel heater with efficiency and energy-saving. The
peak wave length of the radiation power is 4UM with curved surface reflector increasing temperature ramp up speed, improve the thermal efficiency. The special forced-air circulation system make PCB and the component heated uniform and eliminate the "shadow effect" completely.
2. Using special high temperature barrier structure for heat preservation and special iron in
3. Using imported Taiwan SanYue long shaft high temperature blower motor and W shaped heat duct, no noise & vibration, convenient for maintenance.
4. Heating zones with porous aluminum plate directing the hot air to guarantee the heat evenly distributed to the PCB. Hood can open completely so that convenient for cleanup.
Up 8 Zones Hot Air,Bottom 8 Zones IR
Thailand Customer Factory:
Contact Person: admin